Preliminary results of geological, geochemical, and geophysical studies in part of the Virginia City quadrangle, Nevada
Geological, geochemical, and geophysical studies in the Comstock Lode district and adjoining parts of the Virginia Range near Virginia City, Nev., have…
Public-domain full text preserved in the Mountain Man Mining Library. Original source: pubs.usgs.gov.
GEOLOGICAL SURVEY CIRCULAR 596 Preliminary Results of Geological, Geochemical, and Geophysical Studies in Part of the Virginia City Quadrangle, Nevada
Preliminary Results of Geological, Geochemical, and Geophysical Studies in Part of the Virginia City Quadrangle, Nevada By Donald H. Whitebread and Donald B. Hoover GEOLOGICAL SURVEY CIRCULAR Washington J 968
United States Department of the Interior WALTER J. HICKEL, Secretary Geological Survey William T. Pecora, Director First printing 1 968 Second printing 1970 Free on application to the U.S. Geological Survey, Washington, D.C. 20242
CONTENTS Abstract Introduction Acknowledgments Page Geophysical studies Induced-polarization surveys Electromagnetics Geochemical studies Cornwall Knob area Washington Hill area References cited Geology Alta Formation Kate Peak Formation Lousetown Formation Alteration Structure ILLUSTRATIONS FIGURE 1. Index map showing location of Virginia City quadrangle, Comstock Lode district, and limit:;' of the Cornwall and Washington Hill areas Geologic map of Cornwall Knob area Geologic map of the Washington Hill area Map of part of the Cornwall Knob area showing location of geophysical traverses and mercury distribution 5--7, Profiles showing induced-polarization data, Cornwall Knob area: Traverse 1 Traverse 2 Traverse 3 Contour map of induced-polarization values, Cornwall Knob area Profiles showing induced-polarization data, north end of Cornwall Knob area: Traverse 4 10. Traverse 13 Slingram profiles south of Cornwall Knob Turam map of the Cornwall Knob area Maps showing distribution of metals in the Cornwall Knob area: Gold Silver 15. Mercury 16. Copper Lead Maps showing distribution of metals in the Washington Hill area: Gold Silver Mercury Bismuth Copper Lead m Page Page
PRELIMINARY RESULTS OF GEOLOGICAL, GEOCHEMICAL, AND GEOPHYSICAL STUDIES IN PART OF THE VIRGINIA CITY QUADRANGLE, NEVADA By DONALD H. WHITEBREAD and DONALD B. HOOVER Abstract Geological, geochemical, and geophysical studies in the Comstock Lode district and adjoining parts of the Virginia Range near Virginia City, Nev., have resulted in recognition of two geophysical anomalies and several geochemical anomalies in an area north of Virginia City. The geophysical anomalies were found during an induced-polarization survey carried 0ut to aid in tracing the Comstock fault, the principal structure localizing the bonanza silver-gold deposits of the Comstock Lode district, in an area of intensely altered rock and alluvial cover about 5 miles north of Virginia City. Geochemical anomalies showing mercury in excess of 5 ppm (parts per million) were found in altered rocks along the Comstock fault near Cornwall Knob about 5 miles north of Virginia City and in the Washington Hill area, 6 miles farther north. INTRODUCTION The bonanza ore bodies of the rich and highly productive Comstock Lode district, in the Virginia Range near Virginia City, Nev. (fig. 1), were in altered andesitic volcanic rocks along the eastward-dipping Comstock fault. This fault can be traced for a few miles north of Virginia City, but farther north its location is obscured by intense alteration of the enclosing rocks and by alluvial cover. Geological, geochemical, and geophysical studies are underway to determine whether the Comstock fault persists to the north of where it is last recognized at the surface and, if so, to ascertain if possible its attitude, the relations between the fault and rock alteration and mineralization, and the potential for the occurrence of concealed ore deposits along its extension. The Virginia Range is one of several areas in western Nevada that contain epithermal deposits of gold, silver, and mercury in altered andesitic volcanic rocks. The Comstock Lode district is one of the world's greatest precious-metal producers. From 1859 to 1940, the recorded production of silver and gold was $397,445,998 (Couch and Carpenter, 1943, p. 93-94; p. 133-136). The gold-silver ratio by weight was about 1 :40 D Woehinttoft Hill ore a (1 3)
Knob a<oa (fi9Uft 2) FIGURE 1.-Index map showing location of Virginia City quadrangle, Comstock Lode district, and limits of the Cornwall Knob and Washington Hill areas.
Base from U.S. Geological Survey Geology by 1:62,500 Virginia City, 1950 D. H. Whitebread, 1966-67
!A 1 i'OliLE EXPLANATION B Q){ :iJ Alluvium and colluvium ., ' 0 ., (1)'0-u; c CJ s:: (1) "' (1) C)
0:
.,
::E p.. H
Lousetown Formation K<tte l'eak Formation Tki; intrusive r ocks
Alta Formation Approximate contact Fault
Bleached rocks of the Kate Peak and Alta Formations Long-dashed where approximately lucate>d: short- dashed where indefinite or· infe tTt>d; dotted where concealed. l:lar and ball <on dow nth side
Strike and dip of planar structure Prospect FIGURE 2.-Geologic map of the Cornwall Knob area. ,.
:Soz t-<zO::
t-< t-<
0:: ::: t-< 0::
t-<
(Nolan, 1933, p. 633). Argentite, gold, and polybasite occurred with sphalerite, galena, and chalcopyrite; gangue minerals were pyrite, quartz, and some calcite (Bastin, 1923, p. 44-45). Native silver locally replaced the argentite at shallow depths. Aguilarite, a silver sulfoselenide, was recognized in several specimens by Coats (1936, p. 532). The Castle Peak mine, about 7 miles north of Virginia City, has yielded more than 2,500 flasks of mercury, and the Root mine, or Washington Hill prospect, 3 miles farther north, probably yielded a few flasks (Bailey and Phoenix, 1944, p. 184-187). At both localities, cinnabar occurs in intensely altered. andesite. The current geological studies, a part of the Heavy Metals program of the Geological Survey, have revealed several geochemical anomalies and two geophysical anomalies. Two areas in particular are attractive for further investigations: the Cornwall Knob area and the Washington Hill area, about 5 and 11 miles, respectively, north of Virginia City (fig. 1). The Cornwall Knob area is along the northern extension of the Comstock fault (fig. 2). The only indications of previous exploration in the area are widely scattered, shallow prospect pits. While using induced-polarization (IP) methods to aid in locating the northern extension of the Comstock fault in an area of altered volcanic rocks and alluvium, an anomalous area was found near Cornwall Knob. Geochemical sampling revealed high mercury values clustered near Cornwall Knob and about 1 mile south. Geological and geochemical studies here and in the Washington Hill area (fig. 3) have provided additional information on anomalous amounts of mercury reported by Cornwall, Lakin, N akagawa, and Stager (1967, p. Bll-B13). Mercury in excess of 6 ppm (parts per million) is distributed widely at Washington Hill, and in addition, many of the samples in a northeasttrending belt through the Root mine are high in mercury and also contain anomalous amounts of lead, silver, and bismuth. Geologic core drilling is planned to obtain further information on the nature of the IP anomalies and on the relation of the geochemical anomalies to rock alteration and possible mineralization. R.Z1 E. Base from U ,S. Geological Survey Geology by 1:62,500 Virginia City, 1950 · D. H. Whitebread, 1967 lMILE EXPLANATION
]' Bleached rocks of the Kate Peak Formation Tkb; nonresistant bleached rocks composed chiefly .S of quartz and clay minerals 0:: P:: Tkl; resistant ledges of qu_artz of chalcedony, local ::S
alunite, and varying amount. of clay minerals ., Tko; opal or cristobalite
'" "
Kate Peak Formation Approximate contact Prospect FIGURE 3.-Geologic map of the Washington Hill area.
ACKNOWLEDGMENTS The cooperation of the Curtiss Wright Corp., on whose property the investigations were conducted, and the Duval Corp., which is engaged in geological studies in the area, is gratefully acknowledged. In the geophysical work described, G. I. Evenden, assisted by C. L. Tippens, was responsible for the gathering and compilation of the electromagnetic data. D. R. Schoenthaler, R.N. Babcock, and E. D. Seals assisted with the IP surveys. To these coworkers, we extend our ap~ preciation. GEOLOGY Thompson (1956) and Thompson and White (1964) have described the geology within the Virginia City quadrangle, and their geologic maps have been used extensively during the present investigation. The most detailed reports on the geology of the Comstock Lode district are by Becker (1882.), Gianella (1936), and Calkins ( 1944) . Volcanic rocks of Tertiary and Quaternary age cover most of the Virginia Range. The Alta and Kate Peak Formations are the most widespread and together with the Lousetown Formation constitute the bedrock in the areas of this report. According to Thompson and White (1964, p. A14-A15) the upper part of the Kate Peak Formation is probably of Pliocene age. Recent potassium-argon age determinations by J. C. Engels (written commun., 1968) show that part of the Kate Peak, the Alta, and the underlying Hartford Hill Rhyolite Tuff are of Miocene age. Triassic ( ?) metamorphosed sedimentary and volcanic rocks and Cretaceous granodiorite underlie the Hartford Hill Rhyolite Tuff. ALTA FORMATION The Alta Formation is the principal extrusive rock unit in the Comstock Lode district and was the host for the bonanza deposits; for several miles north of Virginia City it makes up much of the footwall block of the Comstock fault. The Alta consists mainly of andesitic flows and flow breccias, but where the rock is altered, the flows and breccias are difficult to distinguish. Calkins (1944, p. 12-15) described four members of the Alta, but they were not recognized outside the Comstock Lode district. In the Cornwall Knob area (fig. 2), the Alta is principally mediumlight-gray hornblende-pyroxene andesite. More altered varieties are commonly shades of green or bluish gray, and some fresh varieties are dark gray. Phenocrysts of plagioclase 1-3 mm (millimeters) in length are conspicuous, and phenocrysts of hornblende, commonly 3-5 mm long, are more than 10 mm long in some places. The pyroxene is not readily visible in hand specimen. The Alta is cut by numerous dikes and other small intrusive bodies. Some of these younger rocks can be distinguished from the Alta by their textural differences or by the presence of biotite; others are nearly indistinguishable, owing to variations in the degree of alteration and other factors. KATE PEAK FORMATION The Kate Peak Formation is composed of flows, flow breccias, intrusive bodies, and tuff breccias; it ranges in composition from andesite to rhyodacite (Thompson and White, 1964, p. A13). Flows predominate within the areas of this report, although flow breccias are especially common north of Cornwall Knob (fig. 2). Flow banding is locally well developed but is quite variable in attitude. In the Cornwall Knob area, the most readily recognized varieties of the Kate Peak are porous to dense, medium-dark-gray, light-gray, or pale-red rocks with conspicuous phenocrysts of plagioclase 5 mm or more in length. Hornblende is the most common dark mineral and is present in all the specimens examined. Biotite occurs as large prominent books or scattered small flakes in some specimens and is absent in others. Where present, it can be used to distinguish the Kate Peak from the Alta. Pyroxene is plentiful in some specimens, but the small green crystals are difficult to detect with a hand lens. Hornblende, biotite, and pyroxene occur together in some specimens. Scattered phenocrysts of quartz are not uncommon. Hornblende-pyroxene andesite in the basal Kate Peak northwest of Cornwall Knob is characterized by smaller and less conspicuous plagioclase phenocrysts and by the absence of biotite. This rock closely resembles the underlying Alta and is locally indistinguishable from it. Several intrusive
bodies of Kate Peak were mapped within the Alta, and some may be present within the areas shown as Kate Peak. In particular, a biotite-rich unit underlying the prominent hill on the west side of sec. 4 may intrude adjacent flows, but relations at the contacts are inconclusive. Outcrops of the Kate Peak in the Washington HiH area (fig. 3) are dense, dark-gray pyroxene-hornblende andesite in which the plagioclase phenocrysts are small and relatively inconspicuous. Pyroxene is more abundant than hornblende, and biotite is lacking. LOUSETOWN FORMATION The Lousetown Formation is made up of welldefined lava flows of medium-gray to dark-gray basalt and basaltic andesite. Individual flows range in thickness from about 5 to 30 feet and have vesicular tops. The flows exposed in the area of figure 2 came from a vent about 1 mile northeast of the map boundary. The Lousetown unconformably overlies the Kate Peak Formation, and in many places a few feet of fluviatile deposits separate the two formations. To the north, fluviatile and lacustrine deposits of the Truckee Formation underlie the Lousetown. Small grains of olivine and phenocrysts of green pyroxene are commonly visible in many flows, and in some places the alinement of plagioclase laths is pronounced. The attitude of platy parting and flow banding does not coincide with that of the gently inclined flows. The Lousetown shows none of the alteration that is typical of much of the underlying Kate Peak and Alta Formations. Potassium-argon dating of flows near the base of the type Lousetown Formation in the Virginia Range gave an age of 6.9 -+- 0.19 m.y. (million years) (Dalrymple and others, 1967, p. 165). Birkeland (1963, p. 1456-57) correlated these flows with flows in the Truckee area that range in age from 1.2 to 2.3 m.y. Thus, the age of the Lousetown is considered to be Pliocene and Pleistocene. ALTERATION Propylitization and intense bleaching are widespread types of alteration in the Alta and Kate Peak Formations. The Alta Formation is generally more altered than the Kate Peak, and prior to the regional studies of Th ~mpson (1956), the extensive alteration was coiJsidered to be restricted to the Alta and older rocks. Becker (1882, p. 81-90) first recogniz~d that the rock, earlier named propylite in th~ Comstock Lode district, was a variety of altered andesite rather than a distinct type of volcanic rock. The widespread propylitic alteration in the district was later described by Coats (1940), who redefined j>ropylitization as alteration characterized by epidote and albite replacing plagioclase and by chlorite, calcite, and epidote replacing ferromagnesian minerals. Altered rocks containing epidote were noted in the Alta and intrusive bodies of the Kate Peak in a few places along the west edge of f?:ure 2, but a less intense alteration, characterized by chlorite-calcite assemblages, is morE: widespread. The ferromagnesian minerals typically are thoroughly altered, but plagioclase appears fresh or only slightly altered. Weak alteration in much of the Kate Peak Formation is denoted by alteration of the hornblende. Zeolites are locally abundant in the Kate Peak Fo~mation near the Comstock fault south of Cornwall Knob. Calkins (1944) and Thompson (1956) mapped areas of intensely altered Alta and Kate Peak Formations as bleached rocks. Generally, the two formations cannot be distiiJguished where they have reached such an advanced stage of alteration. Typical bleached rocks are white to grayish yellow and are irr,~gularly stained by brown, red, and yellow iro"'l oxide. Fractures are commonly coated with dark iron oxide. The porphyritic texture of the original rock ordinarily can be distinguished except in the most intensely silicified varietie·s. Much of the bleached rock is relatively soft and does not form coherent outcrops. Kaolinite, quartz, and alunite are the most common constituents of the bleached rocks, but other clay n1inerals, pyrophyllite, jarosite, cristobalite, gypsum, and diaspore occur locally. More resistant altered rocks commonly contain a larger perce:'ltage of quartz or alunite. The proportions of silica minerals, alunite, and clay minerals vary vridely in resistant ledges like those delineated in figure 3. The most resistant parts, however, are composed entirely of chalcedonic quartz.
In the mines of the Silver City area, about 3 miles south of Virginia City, the bleached rocks commonly grade downward into propylitized rocks peppered with small crystals of pyrite (Gianella, 1936, p. 53). At Virginia City and Gold Hill the intense bleaching apparently persisted as deep as the ore bodies (about 1,500 feet), and Becker (1882) indicated that bleached rocks extend downward to the level of the Sutro tunnel. Thompson and White (1964, p. A28) reported that in a drill hole 4 miles north of Virginia City the bleached rock extends to a depth of 50-75 feet, where it grades downward into altered andesite with pyrite and zeolites. In the areas of this report, disseminated pyrite was found in only a few places in the Alta and the Kate Peak intrusive bodies, and in small dark-gray highly silicified pods in the bleached rock. Gianella (1936, p. 53) and Thompson and White (1964, p. A27) proposed that the bleaching is a near-surface supergene alteration due to the action of sulfuric acid produced when the pyrite was oxidized. At least part of the bleaching, however, probably is the result of hypogene alteration. STRUCTURE According to Thompson and White (1964, p. A35), the Virginia Range consists of tilted blocks bounded by normal faults. The Comstock fault, which can be traced for about 8 miles, is the principal fault in the range. Mine workings in the Comstock Lode district show that the fault dips eastward about 45 o. There the fault has an estimated throw of 2.,500-3,450 feet (Gianella, 1936, p. 85; Thompson, 1956, p. 66), but the throw may diminish to the north. Gianella (1936, p. 81-87) gave evidence for movement along the fault both before and after ore deposition. The fault can be traced north from Virginia City for about 5 miles, and spatial relations between the Alta and Kate Peak define the approximate trace of the fault as far north as the prospect pit about onefourth mile south of Cornwall Knob (fig. 2). Its position north of that point is inferred from geophysical data. The fault in the Lousetown Formation at the northeast corner of the map area, however, probably reflects later movement along a northward extension of the Comstock fault. The two faults east of Cornwall Knob de6 veloped during a period of faultin~ and gentle tilting that occurred after the Lousetown flows. Prominent north- and east-trending resistant ledges in the Washington Hill area (fig. 3) may be alined along faults or fracture~ .. Thompson and White (1964, p. A26) suggested, however, that the ledges are erosional remnants of tabular zones in which nearly all con<;1tituents except silica have been removed. GEOPHYSICAL STUDIES Limited geophysical studies were made in the Virginia City quadrangle in conjunction with the more extensive geological n1apping and sampling program. Because the northern extension of the Comstock fault was of prime importance as a guide to further investigations, most of the geophysical work was concentrated in the region of Cornwall Knob (fig-. 2). One of the authors (Whitebread) has beer. able to map the Comstock fault as far north as a small prospect pit about one-fourth mile soutl· of the crest of the Cornwall Knob (fig. 2). Beyond this point, the fault trace was lost in an area of bleached rock and alluvial cover. Faults have been traced by IP surveys (Sumi. 1959), and this was considered as a possible way of tracing the Comstock fault. Thus IP and electromagnetic surveys were used in an atte~pt to trace the fault zone through this difficult area. Alteration zones appeared to promising areas to study with IP surveys owing to the presence of clay minerals in the bleached outcrops and the gradation downward into propyli tized rocks with pyrite, as d a. scribed by Gianella (1936) and Thompson and White (1964). If the clay mineral content or pyrite content were high enough, it would be possible to map altered zones beneath tl·o. extensive Lousetown flows in the northern part of the quadrangle. INDUCED-POLARIZATION SURVFYS Colinear dipole-dipole electrode gt~ometry was used on all the IP traverses. Measurements were made in the frequency domain using BurrBrown models 97 40 and 97 41 equipment, with frequencies of 0.05 and 5.0 Hz (l·o.rtz). Data reduction was made in the convertional manner, with apparent resistivities computed in ohm-feet/271" (pa/211"), IP values in percent fre-
1;1
~10 Sample locality Showing mercury content in parts per million ')( Prospect EXPLANATION APPROXIMATE M EAN DECLI NATION, 1968 'h MILE
lluvium and colluvium
Lousetown Formation k
g Kate Peak
Formation r·· §,·.-fill
Bleached rocks of the Kate Peak and fil Alta Formations E-<
o Alta :@ Formation 1 114 Induced-polarization traverse Slingram traverse FIGURE 4.-Map of part of the Cornwall Knob area showing location of geophysical traverses and mercury distribution.
BLEACHED ZONE EAST .. 33.8 ~24 31.5 ~I!$ I!$ n - 1 n-2 n-3 EXPLANATION ELECTRODE CONFIGURATION n - 4 n -1
n -2 n-3 n-1 n-2 n-3 n-4 .., 36.3
r--'00 ( pa/21T MF / / / / Y Plotting point / " x eo teet Frequencies: 0.05 and 5.0 Hz FIGURE 5.-Induced-polarization results, Cornwall Knob area, traverse 1. quency effect (PFE), and metal factor (MF) in reciprocal ohm-feet. A small, but well-defined, bleached area (fig. 4) about one-half mile west of Cornwall Knob was selected as the first area to study. The bleached zone, alined in a north-south direction, is about 100 feet wide and 500 feet long. A shallow prospect pit on the north end of this zone contains some pyrite-bearing dark chalcedonic quartz and copper-stained altered rock. The pyrite, in euhedral crystals, is for the most part completely surrounded by silica. Owing to the small size of the bleached zone, a 50-foot dipole length was used on traverse 1 (fig. 4) perpendicular to the long dimension of the zone. A weak anomaly, which correlates well with the outcrop of bleached rock, can be seen in both the resistivity and the PFE data plots (fig. 5). The anomaly is characterized by both higher resistivity and higher PFE. Both anomalous values, however, are only slightly higher than background, and the PFE is lower than would be expected from the pyrite present in the outcrop. Although the pyrite-bearing rock exposed in the prospect pit may not be representative of the rock mass sampled by the traverse, the close proximity (20 feet south) makes this supposition doubtful. These data are consistent with an interpretation of a narrow altered zone containing principally silica and some pyrite and clay minerals. The extensive silicification as seen in the prospect pit could give rise to higher values of resistivity, and the pyrite, to higher PFE. The almost total insulation of pyrite grains by silica would explain the slight increase in PFE above background. Traverse 2 (fig. 4) was run just south of Cornwall Knob in an area of intensive alteration of both the Alta and Kate Peak Formations. The traverse, which was run from the unaltered Kate Peak on the east toward the Alta on the west, crossed the projection of the Comstock fault. The data from traverse 2 (fig. 6) shows, as on traverse 1, a small PFE anomaly, but associated with this is a broad zone of reduced resistivity. The metal factor anomaly is narrow, well defined, and suggests an east dip if it is assumed that a narrow tabular body gives rise to this anomaly. Interpretation of the resistivity data is difficult because of topographic variations on the traverse. The increase in resistivity at both ends, however, is real since the topographic effect would tend to decrease the apparent re-
n-1 ')S : 6.11 5.55 6.37 5.70 7.04 5.815-~6.54 6.-::;
r". EXPLANATION ELECTRODE CONFIGURATION
" / n-1 n-2 02.5~ 02 " / " / " / V Plottino point / " 100 feet 'NO n ;02.6 n-3 03.4 02.6 r.: Frequencies: 0.05 on1 5.0Hz n-1 n-2 n-3 FIGURE 6.-Induced-polarization results, Cornwall Knob area, traverse 2. sistivity at these places. The regions of higher resistivity at the ends of the traverse correlate well with outcrops of unaltered rock. As observed on traverse 1, the frequency-effect anomaly was only slightly above background. The dipole length used in this traverse was 100 feet, which in this location would give penetration below the expected water table. Thus, the depth of penetration was presumably greater than the depth of the zone of pyrite oxidation and acid-leaching effects. No noticeable change in either resistivity or PFE with depth can·be seen within the broad altered zone on this traverse. This may be indicative of a bleached zone shallower than the electrode spacing. A short series of measurements made along this traverse using 50-foot dipole separations and an n spacing of 1 showed no significant changes in resistivity or PFE in comparison to the 100foot, n 1 values. Traverses 1 and 2 show the marginal utility of IP surveys for mapping of altered volcanic areas in this region. Where bleached rocks are exposed on the surface, no difficulty is experienced in mapping, but if the bleached rocks are buried under much cover, the low anomalous PFE values would make their detection difficult and require very careful surveying. This would be especially true in most areas covered by alluvium where the presence of clay ninerals would result in low resistivities. The su""lerficial nature of the bleached rocks is suggested by the lack of a discernible layer on traverse 2. and by a shallow, low-PFE region associated V7ith the altered region on traverse 1. If bleaching, in contrast to propylitization, is due to surface oxidation of pyrite and not to hypogen~ alteration, then the depth of bleached rock is shallower than the electrode separation. This finding is in accord with that of Thomp~on and Sandberg (1958), who on the basis of gravity work concluded that the bleached zo-.,es are superficial. On traverse 2 a narrow PFE anomaly· stands out in the metal-factor plot. Because the anomaly coincides with the Comstock fault, if extended along strike from the south, and because no evidence for faulting exists in the rock on either side of the broad bleached zone, we believe this anomaly defines the fault zo..,e. This is further established by electromagnetic work described later. Since the results on tr~.verse 2 offered some hope that IP surveys could be used to trace the Comstock fault, an effort W?S made to locate the fault farther north by this method. The remainder of the IP traverses in thi~ region
8.96 -o n-1
EXPLA~ATION n-2 ELECTRODE CONFIGURATION NR n-3 ,o, NR NR
n-4
" / " / " / " /
Y Plotting point n-1
/ " 10" feet n-2 Frequencies: 0.05 and 5.0 Hz 01~
NR n-4 NR NR "0 'b n-1 n-2 NR NR MF FIGURE 7.-Induced-polarization results, Cornwall Knob area, traverse 3. were made in an attempt to map the Comstock fault and to test for other faults in a nearby area of anomalous mercury values. Along traverse 3 (fig. 7), about 0.3 mile north of traverse 2, two narrow anomalous zones were discovered. The westermost anomaly is similar to that found on traverse 1, in that higher PFE values are associated with a zone of higher resistivity. A well-defined metal-factor anomaly is also indicated in this region. This anomaly coincides with projections from previous geologic mapping and is believed to be the most probable location of the Comstock fault. The less well defined anomaly near station 7 on traverse 3 appears to be associated with a spur ridge branching east from the main crest of Cornwall Knob halfway between traverses 2 and 3. Additional profiling in the area, however, was not dense enough to reveal the true nature of this anomaly. A frequency-effect map was made (fig. 8) for an n separation of 3, which shows the northeast-trending zone identified with the Comstock fault. Additional traverses would be: desirable to unequivocably relate this zone to the Comstock fault, but in the absence of conflicting information, the present supposition is most tenable. This linear PFE anomaly dies out to the north, where conductive alluvium overlies the bedrock to greater depth. Extension of this trend along strike coincides with a fault cuttin,g the Lousetown Formation. This fault was ea:rlier mapped by Thompson (1956) but not identified by him as the Comstock fault. Becau~e Gianella (1936) found evidence for post mineralization movement along the Comstock faul\ this extension into the Lousetown is possible. Near the north end of the aref'. covered by the PFE map (fig. 8), a strong anomaly associated with the assumed fault zone was discovered. Profile data on traverse 4 (fig. 9) show a strongly anomalous zone with minimum depth of less than 100 feet and probable eastward dip. Here again the PFE anomaly is asr0ciated with a zone of slightly increased resistivity. A traverse with 200-foot dipole spacing and n separation up to 4 indicated no apparent depth limit
FAULT? T ... lll. T.17N. R. E. N l EXPLANATION 1 42 Induced-polarization traverse Contour of PFE values Contour interval 5 percent 400 800 1200 FEET FIGURE B.-Induced-polarization (PFE) map, Cornwall Knob area. to this anomaly. The high PFE values are indicative of sulfide mineralization. In order to ascertain if high mercury values might also be associated with PFE anomalies, several profiles were run east of Cornwall Knob where particularly high mercury values were found. Traverse 13 (fig. 10) was made across a bedrock outcrop which showed greater than 10 ppm mercury. A moderate PFE anomaly correlates well with the high mercury value in outcrop. Topographic effects on this traverse preclude an exact resistivity interpretation; however, the PFE values are again associated with a zone of slightly higher ·resistivity. The profile shows the anomalous zone to be virtually at the surface. ELECTROMAGNETICS Slingram and turam electromagnetic n1ethods were tried in the Cornwall Knob area. One of the two slingram traverses (fig. 4, 87) crossed the Comstock fault zone one-fourth mile south of Cornwall Knob; the other (S3) was ru, along the road just south of Cornwall Knob,, along nearly the same ground as IP traverse 2. These traverses were made using a coplanar horizontal loop configuration with a 200-foot coil separation and station intervals of 100 fe~'~t. The frequency used was 1,800 Hz. The results of both traverses (fig. 11) show a distinct anomaly on crossing the pr-.,jected position of the fault just south of Cornwall Knob. On the east side, in the Kate Pe~.k Formation, a very low resistivity, flat-lying conductive layer is indicated. The presence of bl~ached or altered rock cannot be detected t~y this method, as there is no evident change in conductivity passing through the several altered zones. Smaller anomalies could not be correlated with any surface geologic features. Because of the irregular terrain, noise was introduco.d into the real component through the inability to maintain coplanar coils. The noise may have masked more subtle conductivity chan.f?:es related to the alteration zone. The west side of each traverse shows less conductive roc1· .. associated with the Alta Formation and r0ck of about the same resistivity as obtained trroughout the IP work ( 15 and 50 ohm-meter~) . No such clearly defined resistivity chan was noted on the IP profiles, but as Hall of ( 1967) has pointed out, the two methods sam:ole the environment in decidedly different way~. The slingram anomaly is due to differences in electrical properties of the Alta and Kate Peak Formations and offers a relatively inexpensive means of verifying the fault trace south of Cornwall Knob. To the north of Cornwall Knob, the fault would be in the Kate Peak For1nation, and this method may not be as effective. A turam survey (Frischknecht, 195!') was conducted in areas where strong IP anomalies were found to see· if this method could supplant the more expensive IP surveys. The turam method has greater depth of penetration than the slingram method, which would be important in trying to get below the highly conductive alluvium in much of the region. All turmn trav-
EAST2 lS fl 7.lSO fl 10.62 ,o 13.14 -.;.. 16.6!5 n-1 ~81 EXPLANATION ELECTRODE CONFIGURATION
1!5.00 "" / p0/271" "" // "" / "" / n-1 0!5.3 YP1ottin9 point
/ " x IC\0 feet Frequenciu: o.olS and lS.OHz 0!5.1 u 07.lS
n-1
!568 n-2 82!5 n-3 n-4 MF FIGURE 9.-Induced-polarization results,· north end of Cornwall Knob area, traverse 4. EASTn-1 EXPLANATION ELECTRODE CONFIGURATION
nx " / " / " / " / Y Plottint point IC\0 feet Frequencies: 0.0!5 and !I.O:Hz FIGURE 10.-Induced-polarization results, north end of Cornwall Knob area, traversE: 13.
w u 0::: w z w"' J
u VJ
/'
/
/
/
/
/
J
u
COMSTOCK FAULT I w
TRAVERSE S7 EXPLANATION w u Real componem
w
Imaginary comronent w
u VJ J .:tOO FEET
'-"
u
COMSTOCK FAULT ?I '-" 0::: w
TRAVERSE S3 (CENTRAL PART) FIGURE 11.-Slingram profiles south of Cornwall Knob. erses were made with horizontal coplanar coil configuration and 50-foot station intervals; an operating frequency of 500 Hz was used. The turam map (fig. 12) shows no distinct anomalies, but background noise is high and tends to mask any effect that may be coming from the source of the IP anomaly. The noise on all the turam traverses is attributed to variations in salinity and porosity in the bleached rock and alluvial fill, which make up a highly conductive surface layer. Hall of ( 1967) has previously reported difficulties with electromagnetic methods in semiarid regions where ioncharged ground water can cause anomalies indistinguishable from shallow sulfide bodies. Lines 20S and 28S show anomalies on the east end which may correlate with smaller IP anomalies found on the east side of Cornwall Knob. The IP profiles apparently show the trace of the Comstock fault as a zone of slightly higher resistivity relative to surrounding rock. Increased polarizability results from the higher percentage of clay minerals or sulfides associated with this zone. Electromagnetic tecl'niques are not effective methods for tracing tr~ fault except where it divides different rock units such as the Alta and Kate Peak Formations. In these areas, the slingram technique appears to be an effective aid to mapping, but it would r()t distinguish the fault from a simple formati f)n contact. Neither electromagnetic nor IP n1ethods appear to hold much promise as mappir~ tools for locating bleached zones in the Cornwall Knob area. GEOCHEMICAL STUDIES Geochemical samples were collected in several areas of altered volcanic rocks in the Virginia Range. Most samples have been collected in areas underlain by bleached rocks in an r.ttempt
N I T.I8N. T.t7N. R.2t£. EXPLANATION 24S Line of profile Quadrature component Real component 1200 FEET FIGURE 12.-Turam map of the Cornwall Knob area. to determine whether trace-element distribution and abundance would be useful to define areas in which further exploration for concealed ore deposits might be warranted. Gold was determined by a wet-chemical method using atomic-absorption spectrophotometry. Mercury was determined by a mercury-vapor detector. Other elements were determined by six-step semiquantitative spectrographic analysis. The analysts for gold were W. L. Campbell, M. S. Rickard, T. A. Roemer, G. H. VanSickle, T. G. Ging, Jr., R. B. Tripp, and T. M. Stein; for mercury, W. L. Campbell, W. W. Janes, H. D. King, K. R. Murphy, and S. L. Noble; for silver, lead, copper, and bismuth, D. J. Grimes, E. L. Mosier, J. M. Motooka, E. E. Martinez, and K. C. Watts, Jr. R. 21 E. -+ 0 + 1 o o <ij og o el 0 6
0 o o o I o o o 1 T. 18 N. + % t9 ° I T. 17 N. oo o
so oltP f Cb o o ·' o
o
+- r"
o ! lllltiLE EXPLANATION
0.02-0.04 Sample locality Showing gold content in parts per million FIGURE 13.-Gold distribution, Cornwall Knob area.
R. 21 E. -+ o I + ,
0 o I o o o ol o
g 9 0 o I o I o o o 1 T. 18 N. + r
I T. 17 N. o oo o so 0 oo o
o o o o I I o o o + N f o ! 1 MILE EXPLANATION
Sample locality Showing silver content in parts per million FIGURE 14.-Silver distribution, Cornwall Knob area.
R. 21 E.
-+ + , 32 I 9 I C\1
ol
ii# I. ! -t oOO I I o I o
1 T. 18 N. +
I T. 17 N. o o o o
"' o o + N f o ! 1 MILE EXPLANATION
Sample locality Showing mercury content in parts per million FIGURE 15.-Mercury distribution, Cornwall Fnob area.
R. 21 E. I -+ + , . I rw o rwo rw I rw J
rw rwf'O : "" o I o o o 1 T. 18 N. + 'b ri'rw I T. 17 N. o o o o rw rw o. w rw o rw 0 w + <20 N f rw ! 1 MILE EXPLANATION rw
Sample locality Showing copper content in parts per million FIGURE 16.-Copper distribution, Cornwall Knob area. R. 21 E. -+ rwwP._ I rw I + ,
rw ,. I s ., ,. I I T. 18 N. + r
ri*-. I T. 17 N.
rw-. o
s,.
rw ,.1 I o o ,. + · N f o ! 1 MILE EXPLANATION
<20 Sample locality Showing lead content in parts per million FIGURE 17.-Lead distribution, Cornwr~ll Knob area.
R. 21 E.
(ilo
oro 0
u oo w oo 081# T. e
cf N.
w d 'boo cP w
w "'
N ROOT MINE1t~ r oo
0
lMILE' EXPLANATION w
0.02-0.07 Sample locality Showing gold content in parts per million FIGURE 18.-Gold distribution, Washington Hill area. CORNWALL KNOB AREA Of 125 analyzed samples from the Cornwall Knob area, 58 were collected from outcrop, 21 were from dumps of prospect pits, 38 were soil samples, and eight were iron-rich fracture fillings. Most of the samples were collected in areas underlain by bleached rocks that were apparently barren and unmineralized. The distribution patterns of gold, silver, mercury, copper, and lead are shown in figures 13 to 17. Where several samples of various types were collected at a single locality, the geochemical maps show the highest value obtained. R. 21 E.
() 0 oo 08tJP 6'
()
w oc
Q
w N ROOT MINE~ i oO 0
lMILE EXPLANATION w
Sample locality Showing silver content in parts per millio"l' FIGURE 19.-Silver distribution, Washington Hill area. Only a few scattered samples contained gold or silver in detectable amounts, but mer~ury is present in amounts of 1 ppm or more in 29 of the 84 sample localities. The high rr o.rcury values occur mostly in two clusters ak"'lg the Comstock fault, and the largest concentration is in the bleached rocks near CornwalJ Knob. The other cluster of anomalous mercury values in the NE~ sec. 5 also has four high (>1 ppm) silver values. No geophysical traverses were made here. The distribution of copper is similar to mercury but more widely scatterrrl. Unfortunately, the site of the IP anomaly northeast of Cornwall Knob is covered by alJuvium; T. N.
R. 21 E. .. 28
""'
, T.
..
N.
""'
,;
Ii'
N ROOT MINE 1tl i
I MILE EXPLANATION w
lS Sample locality Showing mercury content in parts per million FIGURE 20.-Mercury distribution, Washington Hill area. therefore, no samples were collected, and a comparison with other areas is not possible. WASHINGTON mLL AREA The distribution patterns of gold, silver, mercury, bismuth, copper, and lead in the Washington Hill area (fig. 3) are shown in figures 18 to 23. Of 232 samples collected, 163 were from outcrops, 26 from dumps of prospect pits, 39 were soil samples, and four were iron-rich fracture fillings. Because of the extensive colluvium that covers most of the slopes underlain by nonresistant bleached rocks, many of the samples R. 21 E.
·I
p O<b J'll. wo 0 oo o'bo 08tl T. e
N .
oc
n ROOT MINE r~tl N
I Mile Explanation
<10 Sample locality Showing bismuth content in parts per million FIGURE 21.-Bismuth distribution, W shington Hill area. were collected along or near the ree·istant ledges delineated on the geologic map (fig. 3). The distribution patterns of the various elements therefore may be controlled to sor1.e extent by the outcrop patterns. Cornwall, Lakin, Nakagawa, and Stager (1967, p. B11-B13) reported the widespread anomalous mercury in the area. Figure 20 shows mercury values of 1 ppm or more in 75 of the 126 sample localities, and of these, 34 contain more than 6 ppm. High values for silver, bismuth, lead, and gold are mostly concentrated in a belt that trenis northeast through the Root mine.
R. 21 E. R. 21 E.
28
0 co
0 q,. 0
T. T.
lilib
w CXb "' w N. "' N.
"'
"
y
w
w
"'
"' ""
,. 0. w
N
w N w ROOT MINE')tl oo i
i
lMILE
I Mile Explanation Explanation "'
<20 <20 300-5()(' Sample locality Sample locality Showing copper content in parts per million Showing lead content in parts per million FIGURE 22.-Copper distribution, Washington Hill area. FIGURE 23.-Lead distribution, Washington Hill area.
REFERENCES CITED Bailey, E. H., and Phoenix, D. A., 1944, Quicksilver deposits in Nevada: Nevada Univ. Bull., v. 38, no. 5, Geol. and Mining ser. no. 41, 206 p. Bastin, E. S., 1923, Bonanza ores of the Comstock lode, Virginia City, Nevada: U.S. Geol. Survey Bull. 735, p. 41-63. Becker, G. F. 1882, Geology of the Comstock lode and the Washoe district: U.S. Geol. Survey Mon. 3, 422 p. Birkeland, P. W., 1963, Pleistocene volcanism and deformation of the Truckee area, north of Lake Tahoe, California: Geol. Soc. America Bull., v. 74, no. 12, p. 1453-1464. Calkins, F. C., 1944, Outline of the geology of the Comstock Lode district, Nevada: U.S. Geol. Survey, open-file rept. Coats, R. R., 1936, Aguilarite from the Comstock lode, Virginia City, Nevada: Am. Mineralogist, v. 21, no. 8, p. 532-534. ---1940, Propylitization and related types of alteration on the Comstock Lode: Econ. Geology, v. 35, no. 1, p. 1-16. Cornwall, H. R., Lakin, H. W., Nakagawa, H. M., and Stager, H. K., 1967, Silver and mercury geochemical anomalies in the Comstock, Tonopah, and Silver Reef districts, Nevada-Utah, in Geological Survey research, 1967: U.S. Geol. Survey Prof. Paper 575-B, p. B10-B20. Couch, B. F., and Carpenter, J. A., 1943, Nevada's metal and mineral production ( 1859-1940 inclusive): Nevada Univ. Bull., v. 37, no. 4, Geol. and Mining Ser. no. 38, 159 p. Dalrymple, G. B., Cox, Allan, Doell, R. R., and Gromme, C. S., 1967, Pliocene geomagnetic polarity epochs: Earth and Planetary Sci. Letters, v. 2, no. 3, p. Frischknecht, F. C., 1959, Scandinavian electromagnetic prospecting: Am. Inst. Mining, Metall., and Petroleum Eng. Trans., v. 214, p. 932-9~7. Gianella, V. P., 1936, Geology of the Sil'T~r City district and the southern portion of the Comstock Lode, Nevada: Nevada Univ. Bull., v. 30, no. 9, 105 p. Hallof, P. G., 1967, The use of indue~ polarization measurements to locate massive s:ul~.fe mineralization in environments in which ETjf methods fail [abs.]: Canadian Centennial Conf. Mining and Groundwater Geophysics, Niagara Falls, Ontario, Nolan, T. B., 1933, Epithermal precious--metal deposits, in Ore deposits of the Western States (Lindgren Volume) : New York, Am. . Mining Metall. Engineers, p. 623-640. ~umi, F., 1959, Geophysical exploratio:-1 in mining by induced polarization: Geophys. Prc~p., v. 7, no. 3, p. 300-310. Thompson, G. A., 1956, Geology of the Virginia City quadrangle, Nevada: U.S. Geol. Survey Bull. 1042-C, p. 45-77. Thompson, G. A., and Sandberg, C. H., 1958, Structural significance of gravity surveys in th~ Virginia CityMount Rose area, Nevada and California: Geol. Soc. America Bull., v. 69, no. 10, p. 1269-1281. Thompson, G. A., and White, D. E., 1964, Regional geology of the Steamboat Spring~ area, Washoe County, Nevada: U.S. Geol. Surva.y Prof. Paper 458-A, p. A1-A52. 1r U. S. GOVERNMENT PRINTING OFFIC:"' : 1970 0 - 399-661