Beryllium resources of the tin-spodumene belt, North Carolina
Pegmatite dikes in the tin-spodumene belt of North and South Carolina uniformly contain about 0.05 percent BeO. The most abundant minerals in the pegmatite…
Public-domain full text preserved in the Mountain Man Mining Library. Original source: pubs.usgs.gov.
GEOLOGICAL SURVEY CIRCULAR 309 BERYLLIUM RESOURCES OF THE TIN-SPODUMENE BELT, NORTH CAROLINA Prepared in cooperation with the North Carolina Department of Conservation and Development and the U. S. Atomic Energy Commission. The report is published with the permission of the Commission.
UNITED STATES DEPARTMENT OF THE INTERIOR Douglas McKay, Secretary GEOLOGICAL SURVEY W. E. Wrather, Director GEOLOGICAL SURVEY CIRCULAR 309 BERYLLIUM RESOURCES OF THE TIN-SPODUMENE BELT NORTH CAROLINA By W. R. Griffitts Prepared in cooperation with the North Carolina Department of Conservation and Development and the U. S. Atomic Energy Commission. The report is published with the permission of the Commission. Washington, D. C., 1954 Free on application to the Geological Survey, Washington 25, D. C.
BERYLLIUM RESOURCES OF THE TIN-SPODUMENE BELT NORTH CAROLINA By W. R. Griffitts CONTENTS Page Abstract Introduction Geology General features Pegmatite geology Distribution and attitude Size and shape Lithology and internal structure Page G eology C ontinued Pegmatite geology Continued Mineralogy Distribution of beryllium .. 3 Beryllium resources Suggestions for prospecting Beryllium content of nonpegmatitic rocks in the Piedmont province 11 Literature cited 12 ILLUSTRATIONS Page Plate 1. Sample localities Inside back cover 2. Map of Solvay Process opencut Inside back cover 3. Map of part of tin-spodumene belt, southwest of Kings Mountain Inside back cover Figure 1. Index map 2. Relation of BeO content to composition of pegmatite 3. Map of Beaverdam Creek area TABLES Page Table 1. BeO and mineral content of samples 2. BeO resources of the tin-spodumene belt 10 3. Value of minerals in one ton of average spodumene-bearing pegmatite .10 4. BeO content of rocks other than pegmatite 11 ABSTRACT Pegmatite dikes in the tin-spodumene belt of North and South Carolina uniformly contain about 0.05 percent BeO. The most abundant minerals in the pegmatite contain from 0.0001 to 0.01 percent BeO. Beryl, having 12.0 to 12. 3 percent BeO, is the only beryllium-rich mineral and contains more than 80 percent of the total beryllium in the rock. Beryl-bearing pegmatite crops out on hillsides near streams that flow through the pegmatite belt. Much of the pegmatite contains spodumene, feldspar, mica, cassiterite, and columbite, as well as beryl, but separating these minerals will require milling. The minable spodumene ore in the Kings Mountain area, above a depth of 300 feet, contains about 40,000 tons of beryl, equivalent to 6, 000 tons of BeO, if 80 percent of the BeO is assumed to be in beryl. Other pegmatite in that area contains an additional 238,000 tons of beryl, or 35, 900 tons of BeO. On the basis of the same assumptions the spodumene ore above a depth of 300 feet in the Beaverdam Creek area contains 6,000 tons of beryl, or 800 tons of BeO, and all other pegmatite in that area contains an additional 13, 000 tons of beryl, or 1, 700 tons of BeO. The entire tin-spodumene belt contains 823, 000 tons of beryl, equivalent to 122,800 tons of BeO. Little beryllium was found in the Piedmont province outside of the tin-spodumene belt. INTRODUCTION The narrow belt of crystalline rocks containing many pegmatite dikes that aptly has been termed the "tin-spodumene belt" (Kesler, 1942) extends from Gaffney, S. C. to a point a few miles east of Lincolnton, N. C. (fig. 1) and is about 30 miles west of Charlotte. The belt is less than 2 miles in width and is about 25 miles in length. It is entirely in the Piedmont, the upland surface of which has an altitude of about 1,000 feet in the area of the pegmatite belt, and has been dissected
1. Kings Mountain area (Spodumene-beryl pegmatites) 2. Beaverdam Creek area (Spedumene-beryl pegmatites) S.Cherryville area (Mica pegmatites) 4 Hiddemle area 5. Conover area (Mica pegmatites) 6. Follston area (Mica pegmatites) 7. Shelby area (Mica pegmatites) NORTH CAROLINA SOUTH CAROLINA Figure 1. Index map of pegmatite areas of the Piedmont province in North Carolina. to form gently-rolling hills with a local relief of about 150 feet. A few hills rise several hundred feet above the surrounding country. Inasmuch as this part of the Piedmont is heavily populated there is a network of good paved and dirt roads that provide ready access to most of the pegmatite deposits. Rail service is available at Kings Mountain, Lincolnton, Grover, Bessemer City, and at a few small mill towns along the pegmatite belt. The discovery of beryllium in mill tailings near Kings Mountain was made as a result of the wartime mill products investigations of the Geological Survey. The presence of beryllium was verified by L. R. Page, who took samples of them in 1948, and a more extensive program of sampling the concentrates, tailings, and pegmatite was then started under his general direction. W. R. Griffitts began this sampling in January 1949, with the assistance of Robert E. Burns, and continued it alone through the summer of 1949. The work was done by the U. S. Geological Survey in cooperation with the Division of Raw Materials of the U. S. Atomic Energy Commission and the North Carolina Department of Conservation and Development. GEOLOGY General features The tin-spodumene belt is underlain by muscovite schist, biotite schist,! hornblende schist and gneiss, and quartz monzonite (Keith and Sterrett, 1951), and is a short distance east of a large body of Cherryville quartz monzonite (Griffitts and Overstreet, 1952, fig. 1). The foliation of the metamorphic rocks trends northeast, roughly parallel to the trend of the belt. Pegmatite geology Distribution and attitude The tin-spodumene belt includes three main types of pegmatite: spodumene-microcline-albite-quartz pegmatite, microcline-albite-quartz pegmatite, and perthite-oligoclase-quartz-muscovite pegmatite. The first two, characterized by non-perthitic microcline and albite, have a rather uniform content of beryl. The albite-bearing pegmatite dikes are composite, consisting of aplite as well as pegmatite. Although the separation is imperfect, the spodumene-bearing pegmatites are commonest in the middle part of the belt. Excluding the oligoclase- and muscovite-bearing pegmatites, the belt is 35 miles long and not over 2 miles wide. The part of the belt that encloses albite-microcline pegmatites rich in beryl, and includes both spodumene-bearing and spodumene-free pegmatites, is outlined on plate 1. Pegmatite dikes are not evenly distributed through the belt. They are abundant and closely spaced in the Kings Mountain area at the narrowest part of the belt and are abundant but more widely spaced in the Beaverdam Creek area and to the north (Kesler, 1942, pis. 39, 40). South of Kings,Mountain the pegmatite dikes strike from north to north-northeast; north of that town the strike is less constant, but it is most commonly northwest, northeast, or east-northeast. The dips are generally steeper than 45 degrees. Several dikes southwest of Kings Mountain plunge northward at angles of from 10 to 30 degrees. The dikes farther north may also plunge gently but neither the direction nor the angle has been determined. Size and shape The pegmatite dikes range from a few feet to 3, 200 feet in length and from 6 inches to 400 feet in width. Drilling by the Foote Mineral Co. has shown a pegmatite dike to extend at least to a 900-foot depth (Anonymous, 1952). At the Ka-Mi-Tin mine, which is at the north end of the belt, a spodumene- and cassiterite-bearing pegmatite dike was proved by diamond drilling to extend at least to a depth of 140 feet, according to D. B. Sterrett (field notes, 1912). Diamond drilling shows that the pegmatites do not change in character with depth and that some pegmatite dikes not exposed at the surface are present at depth. Kesler (1942, p. 268, 269) assumed a downward extension of 100 feet in determining the spodumene
resources of the Kings Mountain and Beaverda.m Creek areas. This now seems to be a very conservative estimate and a depth of 300 feet is used in estimating resources in this report. Actually, it is probable that beryl- and spodumene-bearing pegmatite is as abundant and widespread at a depth of a mile or more as at the surface, but individual dikes naturally are not expected to persist to that depth. Many of the pegmatite dikes are tabular and others have straight tabular members between sharp bends. Some dikes that have been explored finger oui; at their ends and apparently below their keels as well. A few are very irregular, with tabular or wedge-like offshoots from a moderately large central part. Lithology and internal structure The overall composition of each main type of pegmatite is moderately uniform throughout the belt, but the textures vary greatly. South of Kings Mountain much of the pegmatite is fissile or gneissic. The larger spodumene and microcline grains form eyes that are wrapped in moderately to very strongly layered albite-quartz pegmatite that may contain smaller grains of spodumene and microcline. The cleavage surfaces of the large grains commonly are bent and the crystals themselves are broken and the pieces surrounded by the albite-quartz matrix. Most of these dikes are composite, containing aplite as well as pegmatite. The aplite occurs as layers that may be several feet thick. It has less spodumene and microcline than the pegmatite but otherwise it is similar in composition. In the pegmatite dikes south of Kings Mountain, zones are absent or restricted to a few small misses of rock near the contacts where movements in the crystallizing magma did not interfere with normal crystallization. The zones are neither large enough nor common enough to be of much importance in planning either exploration or development. Pegmatite bodies north of Kings Mountain commonly are not conspicuously zoned. The contrast in composition between zones is small and the division must be based primarily upon the size or orientation of the mineral grains and, in some places, on arbitrarily fixed limits of mineral proportions. The grains in the outer part of the dikes are commonly normal to the contacts. Microcline is slightly more abundant in the inner parts of some pegmatite dikes. Some border zones are spodumene free, some are spodumene bearing; otherwise, spodumene seems to be present throughout the spodumene-bearing dikes. Beca.use of the narrowness of most dikes in the northern part of the tinspodumene belt and the small variation in mineral proportions, zones cannot be selectively explored or mined; Many of the dikes in the northern part of the belt are composite, with thin dikes of spodumene-bearing pegmatite cutting larger dikes of spodumene-free pegmatite or of aplite dikes cutting either spodumenebearing or spodumene-free pegmatite. Uncommonly, aplite dikes are cut by spodumene-free pegmatite. In table 1 the textures are described as massive, cleavable, gneissic, sugary, or comb. The massive rocks show no prominant segregation or parallelism of the constituent mineral particles. The cleavable rocks are generally fine grained or have a fine-grained matrix. In these rocks the minerals are not segregated into distinct layers but, because of a strong parallelism among the grains, the cleavage of the rock is well developed. In gneissic rocks the minerals are segregated into layers of different composition; cleavage may be well developed. Sugary texture is common in finegrained rocks or aplites that show neither strong parallelism of mineral grains nor conspicuous segregation of minerals into layers. Comb structure, found commonly only in the pegmatites north of Kings Mountain, consists of elongate mineral grains, generally spodumene, oriented normal to the contacts of the pegmatite dike. Mineralogy The pegmatites of the tin-spodumene belt are composed very largely of albite, microcline, spodumene, and quartz (table 1). Other minerals only locally make up as much as 5 percent of the rock. The common accessory minerals are muscovite, apatite, beryl, cassiterite, and garnet. Many other minerals have been found in the pegmatites (Kesler, 1942, p. 255), but of these only columbite is likely to be of value. The oligoclase-perthite-quartz-muscovite pegmatites along the western side but within the tin-spodumene belt and the sheet-mica bearing pegmatites that are west of the tin-spodumene belt contain fewer minerals, much more muscovite and biotite, and are more clearly zoned. The average grain size of the pegmatites is moderately small. The largest spodumene crystal found was 38 inches long and the largest microcline grain 25 inches. Most crystals of both minerals are smaller than 1 foot. The albite is in grains about 0. 1 of an inch across. Quartz grains, 0.1 of an inch or smaller in diameter, are clustered in aggregates that are as much as 6 inches wide. The beryl in the pegmatites is white to pale green or pale blue; white beryl predominates. The beryl, grains range in diameter from 0.001 inch to as much as 2 inches; most are very small, few measuring more than 0.1 of an inch. Most large grains either have no crystal faces or are stubby crystals about as long as they are wide. The fine-grained white beryl is very hard to recognize in the pegmatite as its color and luster are not very different from those of the associated quartz and feldspar. The omega refractive index of the beryl ranges from 1. 587 to 1. 589, which indicates that the'beryl contains from 12.0 to 12. 3 percent BeO. Distribution of beryllium The BeO of the samples shows no variation that is closely related to the distance of the sample from the walls, crest, or keel of the dike. Dike 25 (pis. 2, 3), exposed in the opencut south of Kings Mountain, was sampled at its north end near its crest and a bulk sample of its middle and lower parts was obtained from the stock pile of millfeed. Near the crest of the dike (sample localities NW, NE, E.) the pegmatite averages 0. 036 percent BeO whereas in the lower part (sample MH-1, table 1) it contains 0.053 percent. Dike 21 (pi. 3) was sampled near its south end (sample locality KM2) and about 600 feet farther north (sample locality KM3) and the BeO assays were 0.059 and0.054percent,
Tatle 1. BeO and mineral content of samples fom the tin-spodumene belt, North Carolina 1 [Symbols: C, cleavable; G, gneissic; M, massive; K, comb; S, sugary] Locality Sample Weight (pounds) Length (feet) 2 Position Minerals 3 Spodumene Percent Grain size (inches) Microcline Percent Grain size (inches) Albite Percent Grain size (inStaes) Quartz Percent Grain size (inches) Muscovite Percent Grain size (inches) Texture BeO (percent) 4 Kings Mountain area (See pi. 3) VM T VTuf T VTuf T VTuf O KM- 2 KM- 2 1/M O KM- 2 T/tjl O trtir
KM- 3 KM- 3 KM- 3 KM- 3 injt -z
-z KM- 14VM )i KM- k KM- k KM- 5
f. Vtjt KM- 7 KM- 7 VTuf "7 VTuI
TOUT "7 KM- 8 KM- 9 KM- 9 KM- 9 T/Vf fv KM-1O A p D A D A P D F A P D A B T B-2 B-3 B-k p D D A k k K ]l ]i O 7 £ ? / 7 Q Q K Q 8f 1 Q 8 f Q 17. k k k Ik T Q T Q East of A East of C East of F East wall West of B- West of C West of D West of E Uoe-h r-P A West of B Entire width do West of B-l West of B-2 Woe-h i-f "R
West of B-4 West of C-- - West of D West of E Entire width West of B n k k 3k k k ' T P. 10 10 k k k k k k k k k 5k
1 Q T Q 2Q 2Q 35in kQ kn "S :L
k 5 n
,1 C /-i P M G6 ( 8) M M
M G M G M M rvQc Qkg Ok6 nnka
Kings Mountain area, Solvay Process Co. opencut10 (See pis. 2, 3) TITTJ1 ivn? tSTP ftTTT tSTP WE1 m NE NE NE
H.7 West of l W<=Ql- nf 9 West of Tjost nf TjoQ-H nf TPact TJnl 1
Uoa-f- nf 1 Tjeat nf O Tjoat nf TJoa 4- rt-P E Woat nf 7
Part of 8 Wo a + TJ T 1 West wall rock East wall rock TJ_3Q-(- fv-P O
IJoQ-S- rtf TJ.-_a-(- rtf h. TJ/-1Q-I- K
£Q (?) M M G G M M G G M nk Kings Mountain area, products of Solvay Process Co. mill10 n O P
12) (14) 4. Beaverdam Creek area5 (See fig. 3) W JDL- p T3f
Tip
W "RP ft ftp Q BC- 9 cu- y a r-7 ft n IR Entire width
do
do
do
do
do TS
on 5 £ ?.& *.a , OR
M M M M M M Akci 04 nk See footnotes at end of table.
Tatile 1. BeO and mineral content of samples from the tin-spodumene telt, North Carolina1 Continued [Symbols: C, cleavable; G, gneissic; M. massive; K, comb; S, sugary] Locality Sample Weight (pounds ) Length (feet) 2 Position k 7a A A A B A 7.O
500(?)'
Entire width
do
do Near middle(?) Rnt.-ir-p wirH-.h-
Minerals 3 Spodumene Percent Grain size (inches) Microcline Percent Grain size ( inches ) AlMte Percent Grain size ( inches ) Quartz Percent Grain size (inches) Muscovite Percent Grain size (inches) Texture BeO (percent) 4 Other areas 15 (See pi. 1) o o 1+2 o 9=; P M M M M M M S M nA 1 Composition (nearest 1 percent) and grain size were estimated visually. 2 Measured normal to dike. "Other minerals: KM-4 (A), apatite, 5 percent; KM-4 (B), cassiterite(?); KM-4 (D), cassiterite(?); KM-10 (A), biotite; NE-5, tourmaline; NE (10), apatite. *By spectrographic assay. O3 5Analyses by Saratoga Laboratories, Inc. 8 75 percent. 7 Matrix. 8Aplite matrix (25 percent coarse grains). "Poor. °Analyses by National Spectroscopic Laboratories, Inc. fllreed. 2 Spodumene concentrate. 3Muscovite concentrate. Feldspar concentrate. 5Analyses by Strock Laboratories, Inc. 8 Thin pods.
respectively. The uniformity of BeO content in the samples of the entire area given on table 1 suggests that there is little variation within the dikes. The BeO of the pegmatite does not vary greatly with varying proportions of the essential minerals spodumene, microcline, and albite. The general relation between BeO and the proportions of these minerals, recalculated to total 100 per.cent, is plotted on triangular coordinates in figure 2. In most of the samples containing more than 0.06 percent BeO, the albite comprises from 35 to 65 percent of the three minerals; microcline and spodumene are present in a. ratio of about 40 to 60. Although beryl has been recognized in only a few pegmatites in the tin-spodumene belt, it is probably the mineral in which most of the beryllium is contained. Some albite samples contain as much as 0.01 percent BeO, but the material assayed was fine grained and might well have contained small grains of beryl. However, plagioclase generally contains much less BeO as shown by the lack of a very close correlation between the plagioclase and BeO contents of the pegmatites. Semiquantitative spectrographic analysis shows that plagioclase from four other pegmatites in the belt contain from 0. OOOX to 0. OOX percent BeO. Similar analyses of microcline from these four pegmatites indicated up to 0.OOOX percent BeO. Quartz interstitial Fractions represent spectrographically determined BeO content of rock. Mineral percentages based on visual estimates. Generalized contours enclose areas with about -05, .06, and .07 percent BeO. Spodumene
Microcline Percent microcline Albite Figure 2. Relation of BeO content to mineral composition of pegmatite.
to feldspar and spodumene contained less than 0.0001 percent BeO, the minimum detectable by the semiquantitative spectrographic methods used in the Geological Survey laboratories. The spodumene concentrate produced in the mill of the Solvay Process Co. contains as much as 0.074 percent BeO (sample C-l, table 1), because beryl is concentrated with the spodumene The beryllium is not in the spodumene itself, but results from admixtures of beryl in the concentrate. Kesler (unpublished notes, 1945) reported a spodumene concentrate that contained 1. 2 percent of beryl as determined by grain counts. A hand-picked spodumene concentrate from pegmatite dike 25 contained O.OOX percent BeO by semiquantitative spectrographic analysis. Quantitative spectrographic analyses of the BeO content of minerals from locality 3 (pi. 1), south of Laboratory, N. C., are as follows: Large spodumene-free dike: Minerals from border zone: Muscovite Albite Minerals from wall zone: Muscovite Albite - Perthite - Minerals and rocks from core: Perthite - Muscovite Granite - - Aplite - Small spodumene-bearing dike that cuts the large spodumene-free dike: Minerals from border zone: Muscovite Microcline Spodumene
Minerals from core: Muscovite Albite Microcline Spodumene-
BeO (percent) 1 1 Spectrographic analyses by A. A. Chodos, Geochemistry and Petrology Branch, U. S. Geological Survey. On the basis of these data and the absence of any other known beryllium-rich mineral, it is assumed that at least 80 percent' of the beryllium in the pegmatite is in the form of beryl. BERYLLIUM RESOURCES The beryllium content of the pegmatites in the tinspodumenebelt is remarkably uniform. Of 96 samples taken, only 11 had less than 0.02 percent BeO and 11 more than 0.07 percent. The average of all samples taken in the Kings Mountain a.rea (pi. 3) is 0.054 percent. In the Beaverdam Creek area (fig. 3) it is 0.044 percent. It is probable, therefore, that the average BeO content for each of the'main areas sampled 0.05 percent can be taken as the average for all pegmatites in the belt. The average BeO content of the pegmatites might decrease progressively northeastward along the belt. In computing the tonnage of pegmatite the figures for rock tonnage are given to the nearest 100,000 short tons, the figures for beryl to the nearest 1,000 short tons, and the figures for BeO to the nearest 100 short tons. The beryllium resources were roughly estimated for the Kings Mountain area, the Beaverdam Creek area, and the entire pegmatite belt. In making these estimations it was assumed that the volume of 1 ton of spodumenefree pegmatite was 12 cubic feet and the volume of 1 ton of spodumene-bear ing pegmatite was 10 cubic feet, that 80 percent of the BeO was in beryl, and that the pegmatites south of Kings Mountain contained 0.054 percent BeO and those farther north contained 0.044 percent BeO. The vertical extent was assumed to be 300 feet. Kesler's estimates of the tonnage of pegmatite that would be minable for spodumene and of the tonnage of the parts of spodumenebearing dikes that would not profitably be minable for spodumene (Kesler, 1942, p. 268) were revised to include material to a 300 foot depth, as he included pegmatite down to only 100 feet, but his figures were not otherwise modified. The outcrop areas of spodumene-free pegmatite were determined from maps and the tonnage was computed using the assumptions listed above. The district estimate was made by comparing the size and number of pegmatite dikes in various parts of the belt with those on the Kings Mountain andBeaverdamCreekareas. The beryllium resources thus estimated are given in table 2. A rough estimate of the spodumene resources of the belt might be made by assuming that one-third of the total tonnage of pegmatite, about 66,000,000 short tons, contains 10 percent spodumene, or 6, 600,000 tons. The amount of beryl estimated to be in the pegmatite of the tin-spodumene belt would satisfy the domestic beryllium requirements for many years if a satisfactory method is devised by which the beryl can profitably be extracted from the rock. The extraction will obviously require grinding the rock, and the values of the various minerals in a ton of average spodumene ore given in table 3 indicate that most of the cost of a milling operation will have to be repaid by sale of spodumene and feldspar. Beryl, mica, and heavy minerals will be byproducts. The production of beryl, therefore, will depend upon the market for spodumene and feldspar. SUGGESTIONS FOR PROSPECTING Outcrops of relatively unweathered beryl- and spodumene-bear ing pegmatite are common in the tinspodumene belt where hill slopes toward nearby streams are moderately steep. Thus, the valley walls along parts of Kings, Dixon, and Mill Creeks south of Kings Mountain andalong parts of IndianCreek, LongCreek, the South Fork River, and some their tributaries north of Kings Mountain have many outcrops of pegmatite. Surface sampling for beryl and exploration of depth by diamond drilling of promising deposits should prove the presence of large tonnages of beryllium-bearing rock. The possibility that the dikes may plunge at a gentle angle should be kept in mind while planning any exploration of the dikes at depth. Southwest of Kings Mountain the thickest part of a. dike at depth will generally be north of the thickest part of the outcrop because of the northerly plunge. The direction and angle of plunge in the part of the belt north of Kings Mountain must be determined for the dikes following each of the common trends. Inasmuch as exploitation of the deposits will require milling the rock, it will be necessary to mine large tonnages as cheaply as possible. Small dikes thatwould support small-scale mining operations if the minerals could be separated by hand cobbing would, therefore, be of little value. Attention should naturally be given first to the largest dikes, to closely spaced small dikes that could be mined as one operation, and to dikes that are favorably situated for cheap mining. Detailed studies of internal structure are of less help in planning exploration and development than in
Contact between intergrading hornblende omt biotite gneisses on the northwest, and Intertayored / museovite schist and hornblende //gneiss on the southeast. Contour intern! IOO feet, Datum Is mean sea level Base ond geoiogy after R A Edwards. R M-Borbour ond TL Kesler. Surveyed January-May 1939. .Beryllium ssmallng by W.R.Srlffitt., 1949 Figure 3. Geologic map of the Beaverdam Creek area, North Carolina.
Table 2. BeO resources of the tin-spodumene belt, North Carolina Area and. kind of pegmatite Pegmatite (short tons) Beryl (short tons) BeO (short tons) Kings Mountain and Beaverdam Creek areas (pi. 3, fig- 3) (A) Kings Mountain area: Spodumene-rich 11,100,000 Spodumene-poor - 44,400,000 Spodumene-free 22,000,000 Total 77,500,000 (B) Beaverdam Creek area: Spodumene-rich 1,900,000 Spodumene-poor 1,900,000 Spodumene-free 100,000 Total 3,900,000 Entire belt (pi. l) (C) Entire area southwest of Kings Mountain, including (A): All kinds 155,000,000 (D) Between Kings Mountain and (B): All kinds 15,200,000 (E) (B) and area to north: All kinds 30,500,000 Total 200,700,000 40,000 160,000 78,000 278,000 6,000 6,000 1,000 13,000 6,000 24,000 11,900 41,900 1,700 745,000 26,000 52,000 823,000 111,700 3,700 7,400 122,800 Table 3. Value of minerals in 1 ton of average spodumene-bearing pegmatite from the tin-spodumene belt, North Carolina 1 Mineral Quantity in pegmatite Percent Units per short ton Valueper unit Value Unit Value per short ton (nearest $0.25) Spodumene Beryl - Feldspar-- Mica - Columbite - Cassiterite- $7-00 unit unit BeO. short ton. do-- - pound- - pound contained tin. $10.00 Total- $19.00 The value of tailings as sand is not included. other beryl- and spodumene-producing districts because of the uniformity of beryl distribution in the pegmatite. The mineralogy of the pegmatite is a moderately reliable indicator of beryllium-bearing pegmatite, however. Pegmatites that have more than a few percent of muscovite in books larger than one-half inch in diameter, pegmatites in which the plagioclase contains less than 90 percent albite, or pegmatites in which all the potash feldspar is distinctly perthitic, are not apt to contain very much beryl. The uncommon pockets of beryl that are in muscovite or perthite-rich pegmatites are moderately coarse grained and as a consequence the beryl is recoverable by hand methods, but few pockets are likely to yield as much as a ton of beryl. The same areas that are favorable for beryl prospecting are also favorable for spodumene prospecting. The perthite-rich and muscovite-rich pegmatites are as unfavorable as sources of spodumene as they are of beryl. Indirect mineralogical evidence is not
needed, however, as the spodumene itself can readily be recognized in the outcrops. The former presence of spodumene in thoroughly kaolinized pegmatite can be determined from the shape of the masses of clay that have replaced the spodumene. The shape of the spodumene grains in any area must be determined by an examination of the fresh outcrops as the shapes differ in different parts of the belt. It is possible to estimate the spodumene content of the outcrops a.nd quickly determine what dikes are worthy of further exploration for that mineral. BERYLLIUM CONTENT OF NON-PEGMATITIC ROCKS IN THE PIEDMONT PROVINCE Samples were taken of various types of rocks in North and South Carolina, but economically important beryllium concentrations were found only in pegmatite. The results of this sampling are given in table 4. The importance of the amount of beryllium contained in these samples maybe judged by comparing them with the average beryllium content of igneous rocks, about 0.0006 percent (Rankama and Bahama, 1951, p. 443), andof clays, 0.004to 0. 0036percent (p. 447). Table 4. BeO content of rocks other than pegmatite of the tin-spodumene belt, North Carolina Rock AT 4- ci Tci 4-ci
Andaluslte -hematite rock. Kyanite quartzlte Qyj-? r-t -3 4" Qr*Vl1 Cl4" Tactlte (near Cherryvllle quartz monzonlte). Tactlte (near Toluca quartz monzonite) . Pyrlte and serlclte schist.
i m c?r*Vi "i o 4"
rpc-vptfl 17 Tin -- -
Do-- - - Ottrelite serlclte schist. Do- Pyrophyllite -quartz rock. Locality District Kings Creek, S. C. Jefferson Mountain, S. C.' (Kings Mtn. quadrangle) .
Henry Knob, S. C.
do
do - 2 miles northwest of Kings Mountain, N.C. 8 miles northwest of Shelby, N. C. a Tin Tina
miles northeast of Llncolnton, N. C. miles east of Llncolnton, N. C. 8 miles northwest of Shelby, N. C. Jefferson, S. C.
do
rin do do do Gold Hill, N. C.-, Staley, N. C. Mine Kings Mountain gold mine.
do Sloan pyrite mine Brewer mine"
do fl,-,
do fl,-,
rlr, do Halle gold mine do Pit or area Topaz pit Float area 1TjIT y-vrj4" O Float area y- Float area 4- Northeasternmost pit. North of Brewer pit.
do Tan yard pitBeO (percent) 1 2 <0.0003 3 <.0001 3 <.0001 1 BeO determinations by Strock Laboratories, Inc. except as noted. 2 Not detected spectrographically. 3 BeO detenninations by Janet D. Fletcher, U. S. G. S.; BeO not detected, hence less than 0.0001 percent. *Map designation used by Carl Fries (1942, pi. 7).
LITERATURE CITED Keith, Arthur, and Sterrett, D. B., 1931, Description of the Gaffney and Kings Mountain quadrangles, Fries, Carl, 1942, Topaz deposits near the South Carolina and North Carolina: U. S. Geol. Brewer mine, Chesterfield County; South Survey Geol. Atlas, folio 222. Carolina: U. S. Geol. Survey Bull. 936-C, Kesler, T. L., 1942, The tin-spodumene belt of the p. 59-78. Carolines: U. S. Geol. Survey Bull. 936-J., p. 245-269. Griffitts, W, R. and Overstreet, W. C., Rankama, Kalervo, and Sahama, T..G., 1950, Geo1952, Granitic rocks of the western Carolina chemistry: Univ. Chicago Press. Piedmont: Am. Jour. Science, v. 250, Anonymous, 1952, More spodumene from Kings p. 777-789. Mountain: Eng. and MIn. Jour., v. 153, p. 95. INT.-DOP. SBC., WASH., D.C SU73
UNITED STATES DEPARTMENT OF THE INTERIOR SURVEY _.CIRCULAR 309 PLATE 1. 35° EXPLANATION Approximate boundary of spodumene-rich and beryl-rich pegmatite belt Outline of area discussed in text Sample locality with number SAMPLE LOCALITIES IN THE TIN-SPODUMENE BELT 4 Miles
STATES DEPARTMENT OF THE INTERIOR GEOLOGICAL SURVEY CIRCULAR 309 PLATE 2 EXPLANATION Hornblende schisl (Some layers contain dolomite, pyrite, chlorite, or glaucophane.) Contact, showing dip; dashed where approximately located Fault showing dip Strike and dip of foliation Plunge of spodumene crystals in pegmatite Strike and dip of foliation and plunge af lineation Rim of opencut NE 5-- i Location and number of sample Contour interval 10 feet Datum is mean sea level Topography by R. E. Burns and W. R. Griffitts, GEOLOGIC MAP OF THE SOLVAY PROCESS COMPANY OPENCUT, KINGS MOUNTAIN AREA, NORTH CAROLINA Geology by W.R Griffitts
UNITED STATES DEPARTMENT OF THE INTERIOR GEOLOGICAL SURVEY CIRCULAR 309 PLATE 3 EXPLANATION tomorphic rockt (Htavy aathtd lint shout approx'mott northmtsttrn limit of crystal/'** I mutant) Kings GEOLOGIC MAP OF PART OF THE TIN-SPODUMENE BELT SOUTHWEST OF KINGS MOUNTAIN, NORTH CAROLINA ZOOO 5000 Fit! Contour intfrvol IOO fttf. Datum is iatatr sta Inft Bust ond gtology ofltr R M. LlBoro HE LtGrond, J.C. Morri ond T. L.KHltr, I93B-I94O; btryllium tompling by W. R.Griffitti, 1949.